Listen Tech Listen iDSP Essentials Level 2 Stationary RF System (72 MHz)

Listen iDSP Essentials Level 2 Stationary RF System (72 MHz) | LS-31-072

by Listen Technologies

$1,679.00

Professional guidance helps This system requires physical installation, audio integration with existing venue infrastructure, frequency selection, and ADA compliance considerations. A knowledgeable AV installer or AT professional can handle setup without a clinical assessment, but it's far beyond self-serve or casual guided setup — venue layout assessment and audio routing expertise are needed for reliable results.

Last verified July 28, 2026 · classified May 31, 2026

What it is

Summary

AI-generated from vendor-published content · May 31, 2026

This is a complete RF assistive listening system designed for permanent installation in venues like houses of worship, lecture halls, courtrooms, or theaters. The transmitter connects to an existing audio source — PA system, podium microphone, or AV output — and broadcasts wirelessly to included receivers at 72 MHz across up to 1,000 feet. Three selectable broadcast frequencies give installers flexibility when managing interference or running adjacent systems in the same building. The digital tuning on the receivers is a practical advantage over analog FM systems: listeners won't need to readjust if the signal drifts. This is a stationary installation system, not a portable or personal-use device — it requires physical mounting, audio routing, and typically coordination with a venue's AV infrastructure before it's useful to anyone.

Quick Facts Catalog facts · auto-generated
Addresses
Age range
ComplexityProfessional guidance helps
Price$1,679.00
Funding
  • AT Act lending
  • Out of pocket
  • Vocational rehab
VerifiedJuly 28, 2026
ClassifiedMay 31, 2026 · confidence: high

What Setup Looks Like

  • With a guide
    1. Mount the transmitter in a fixed location with access to the venue's audio source (PA mixer, microphone feed, or AV output).
    2. Connect audio input using compatible cables (XLR, 3.5mm, or RCA depending on source).
    3. Select one of three broadcast frequencies to avoid local interference, then confirm receivers tune and lock to the signal.
    4. Distribute receivers to users at the venue — full installation typically takes 2–4 hours for a single room. See manufacturer support resources for detailed instructions.
  • With professional help
    1. An AV integrator or AT specialist should assess the venue's audio routing, room geometry, and any interference from adjacent systems before purchasing.
    2. For ADA-compliance documentation or integration with a larger hearing loop or captioning system, consult an assistive listening systems professional.

Getting it

Try Before You Buy

Devices like this are often available to borrow through your state's AT Act program — typically free or low-cost — so you can try it before buying or pursuing funding.

Where to Get It

diglo Visit
$1,679.00

This is the vendor WhatCanHelp tracks for this product — it may also be available from other retailers or a local supplier, and prices vary.

Some links may be affiliate links — WhatCanHelp may earn a small commission from purchases at no extra cost to you. More on affiliates →

As an Amazon Associate we earn from qualifying purchases.

How to Fund This

Equipment like this is often pursued through official state programs. These are common starting points — each program decides its own eligibility and what it covers, so the first step is always a phone call.

All funding programs, state by state →

Sources & fine print

Vendor facts (name, price, platforms, vendor link) sourced from Listen Technologiesview on vendor site; last verified July 28, 2026.

Classification & description AI-generated from vendor-published content on May 31, 2026 · confidence: high. Vendor specs may lag; verify before relying on details in a clinical or funding artifact.