A grey magnifier lamp with a large round lens on a jointed arm attached to a desk clamp.

WAVE LED Magnifier- 45in Arm- 3.5D 1.88x- Clamp- Grey

by Luxo

$615.00, see price history

Price is what the vendor listed when last checked. Confirm it with the vendor before buying.

Ready to use You clamp it to a table, switch it on, and start using it. The arm has no knobs to adjust and nothing to pair or program, so most people can get a good result right away without help. A fixed lens strength means you should be comfortable with this level of magnification before you buy.

What it is

Summary

AI-generated from vendor-published content · October 1, 2026

This is a clamp-mounted lamp magnifier that puts a large glass lens and bright LED light right over your reading or work area. The lens is 6.75" x 4.5" with 3.5 diopter (1.88x) magnification, so it suits print, detailed hobbies, and close projects. Two dimmable LEDs have separate left and right controls, so you can adjust the light to cut glare or shadow. The 45" arm has no knobs to tighten; the head stays where you put it, which leaves both hands free. It clamps to the edge of a desk or table, so you need a surface that can hold the clamp.

Getting it

Try before you buy

Devices like this are often available to borrow through your state's AT Act program — typically free or low-cost — so you can try it before buying or pursuing funding.

Find your state's lending program →

Where to get it

MaxiAids Visit
$615.00

This is the vendor WhatCanHelp tracks for this product — it may also be available from other retailers or a local supplier, and prices vary.

How to fund this

These are common places to ask about paying for equipment like this. Each one decides its own eligibility and what it covers, so start by asking them.

All funding programs, state by state →

Details

Quick Facts Catalog facts · auto-generated
Type
Addresses
Platform
Age range
Complexity
Ready to use
Price
$615.00
Funding
  • AT Act lending
  • Out of pocket
  • Vocational rehab

What setup looks like

  • Out of the box
    1. Clamp the base to the edge of a sturdy desk or table.
    2. Move the lamp head over your work and let it settle in place. The arm needs no knobs or tightening.
    3. Turn on the lights and adjust the left and right dimmers until the print is easy to see.

Sources & fine print

Vendor facts (name, price, platforms, vendor link) sourced from MaxiAids — view on vendor site (opens in a new tab); last checked November 2, 2026.

Classification & description AI-generated from vendor-published content on October 1, 2026 · confidence: high. Vendor specs may lag; verify before relying on details in a clinical or funding artifact.

How listings stay current