A black articulating arm magnifier with a wave-shaped lens head, mounted on a clamp base.

WAVE LED- ESD Magnifier- 30in Arm- 3.5D- Clamp- Black

by Luxo

$850.95, see price history

Price is what the vendor listed when last checked. Confirm it with the vendor before buying.

Ready to use This is a complete, standalone lamp. You clamp it to a desk, plug it in, and use it right away. There is no pairing, software, or training, and the arm needs no tightening or adjusting, so most people get benefit within minutes.

What it is

Summary

AI-generated from vendor-published content · October 1, 2026

This is a desk-mounted magnifier lamp with a 3.5-diopter (1.88x) glass lens, 6.75" x 4.5", and two dimmable 6W LED lights. You can adjust the left and right lights separately, and the anti-reflective lens cuts glare from overhead lighting. The 30-inch arm has no knobs to tighten, so the head stays wherever you put it, and your hands are free for reading, detail work, or hobbies. It also has an ESD-safe finish for static-sensitive work areas, and an edge clamp attaches it to a desk or table. The lights shut off automatically after 4 or 9 hours. It's a fixed, mounted lamp, so it works best for a set workspace rather than something you carry around.

Getting it

Try before you buy

Devices like this are often available to borrow through your state's AT Act program — typically free or low-cost — so you can try it before buying or pursuing funding.

Find your state's lending program →

Where to get it

MaxiAids Visit
$850.95

This is the vendor WhatCanHelp tracks for this product — it may also be available from other retailers or a local supplier, and prices vary.

How to fund this

These are common places to ask about paying for equipment like this. Each one decides its own eligibility and what it covers, so start by asking them.

All funding programs, state by state →

Details

Quick Facts Catalog facts · auto-generated
Type
Addresses
Platform
Age range
Complexity
Ready to use
Price
$850.95
Funding
  • AT Act lending
  • Out of pocket
  • Vocational rehab

What setup looks like

  • Out of the box
    1. Clamp the base to the edge of a desk or table and plug the lamp in.
    2. Move the head into place, then adjust the left and right LED brightness to suit your eyes.

Sources & fine print

Vendor facts (name, price, platforms, vendor link) sourced from MaxiAids — view on vendor site (opens in a new tab); last checked November 2, 2026.

Classification & description AI-generated from vendor-published content on October 1, 2026 · confidence: high. Vendor specs may lag; verify before relying on details in a clinical or funding artifact.

How listings stay current