A tilted rectangular tabletop in wood-grain finish, mounted on an adjustable-height beige metal frame with T-shaped legs.

Wheelchair Accessible Table-Adjustable Height-Tilt

by ADAS

$479.95, see price history

Price is what the vendor listed when last checked. Confirm it with the vendor before buying.

Ready to use This is a complete, standalone table. There is nothing to pair, program, or connect to anything else. Adjusting the height and tilt by hand is simple, and you get the benefit right away. A therapist can help pick the best height and angle for a specific person, but you don't need one to use it.

What it is

Summary

AI-generated from vendor-published content · October 1, 2026

This worktable gives wheelchair users a surface at the right height, with open knee space underneath so they can pull up close. The legs adjust from 23 to 33 inches in 1-inch steps. You loosen an oversized knob, move the leg, and tighten it again. The top also tilts from 0 to 50 degrees, which helps with reading, writing, or rehab tasks that work better on an angled surface. A 1/2-inch lip along the front edge keeps books and papers from sliding off when the top is tilted. It's built for both children and adults, with a powder-coated steel base and a laminate top. The height is set by hand, so it isn't a good fit if someone needs to change heights often without help.

Getting it

Try before you buy

Devices like this are often available to borrow through your state's AT Act program — typically free or low-cost — so you can try it before buying or pursuing funding.

Find your state's lending program →

Where to get it

MaxiAids Visit
$479.95

This is the vendor WhatCanHelp tracks for this product — it may also be available from other retailers or a local supplier, and prices vary.

How to fund this

These are common places to ask about paying for equipment like this. Each one decides its own eligibility and what it covers, so start by asking them.

All funding programs, state by state →

Details

Quick Facts Catalog facts · auto-generated
Type
Addresses
Platform
Age range
Complexity
Ready to use
Price
$479.95
Funding
  • AT Act lending
  • Medicaid waiver
  • Out of pocket
  • School district
  • Vocational rehab

What setup looks like

  • Out of the box
    1. Loosen the leg knob, set the table to the height that fits the person in the chair, then tighten the knob again. Heights run from 23 to 33 inches in 1-inch steps.
    2. Tilt the top anywhere from 0 to 50 degrees for reading, writing, or rehab activities. The front lip keeps materials in place.

Sources & fine print

Vendor facts (name, price, platforms, vendor link) sourced from MaxiAids — view on vendor site (opens in a new tab); last checked November 2, 2026.

Classification & description AI-generated from vendor-published content on October 1, 2026 · confidence: high. Vendor specs may lag; verify before relying on details in a clinical or funding artifact.

How listings stay current