A white illuminated magnifying lamp with a large lens on a jointed articulating arm and clamp base.

Luxo 3.5D Wave+LED Magnifier with 45" Arm/Clamp

by Luxo

$596.95, see price history

Price is what the vendor listed when last checked. Confirm it with the vendor before buying.

Ready to use This is a complete, stand-alone magnifier. You clamp it to a table, plug it in, and use it the same day with no pairing, software, or training. The lens strength is fixed and no other devices are involved, so it fits self-serve.

What it is

Summary

AI-generated from vendor-published content · October 1, 2026

The Luxo Wave+ LED is an illuminated desk magnifier: a large glass lens with built-in lighting on a long arm that clamps to the edge of a table. The lens is 6.75 by 4.5 inches and magnifies 1.9X (3.5 diopters), so it gives a wide view for reading, handwork, and other close tasks. It has two dimmable LED lights you can adjust separately on the left and right, and it shuts itself off to save power. The self-balancing shade and neck hold the lamp in place without knobs to tighten, which helps if you have trouble gripping or twisting small controls. The clamp needs a table edge it can grip, and the 45-inch arm reach is fixed, so check your workspace first.

Getting it

Try before you buy

Devices like this are often available to borrow through your state's AT Act program — typically free or low-cost — so you can try it before buying or pursuing funding.

Where to get it

Independent Living Aids Visit
$596.95
LS&S Visit
$596.95

These are the vendors WhatCanHelp tracks for this product — it may also be available from other retailers or a local supplier, and prices vary.

How to fund this

These are common places to ask about paying for equipment like this. Each one decides its own eligibility and what it covers, so start by asking them.

All funding programs, state by state →

Details

Quick Facts Catalog facts · auto-generated
Age range
Complexity
Ready to use
Price
$596.95
Funding
  • AT Act lending
  • Out of pocket
  • Vocational rehab

What setup looks like

  • Out of the box
    1. Clamp the base to the edge of a sturdy table or desk.
    2. Plug in the lamp, turn on the lights, and adjust the left and right brightness.
    3. Move the arm and lens into position over your reading or work area. No tightening knobs are needed.

Sources & fine print

Vendor facts (name, price, platforms, vendor link) sourced from LS&S — view on vendor site (opens in a new tab); last checked November 4, 2026.

Classification & description AI-generated from vendor-published content on October 1, 2026 · confidence: high. Vendor specs may lag; verify before relying on details in a clinical or funding artifact.

How listings stay current