A grey magnifier lamp with a round illuminated lens on a jointed swing arm, mounted on a round weighted base.

KFM LED Magnifier- 30in Arm- 3.0D- 1.75x- Base- Grey

by Luxo

$609.00, see price history

Price is what the vendor listed when last checked. Confirm it with the vendor before buying.

Ready to use This is a complete, standalone tool. You place it on a desk, plug it in, and move the arm where you want it, with no pairing, software, or training. Most people get a benefit within minutes. The one choice to make up front is magnification strength, and the 1.75x lens is a gentle level that suits many tasks.

What it is

Summary

AI-generated from vendor-published content · October 1, 2026

This is a lighted desk magnifier with a 5-inch lens and a dimmable 9W LED light, so you can see small print and fine detail while keeping both hands free. The lens is 3.0 diopters (1.75x), a mild level of magnification that works well for reading, handwork, and close tasks. The 30-inch spring arm holds the lamp head in any position without knobs to tighten, and the weighted base keeps it steady on a desk or table. It runs on mains power and has auto shut-off. Stronger 4- and 6-diopter lenses are sold separately if you need more power later.

Getting it

Try before you buy

Devices like this are often available to borrow through your state's AT Act program — typically free or low-cost — so you can try it before buying or pursuing funding.

Find your state's lending program →

Where to get it

MaxiAids Visit
$609.00

This is the vendor WhatCanHelp tracks for this product — it may also be available from other retailers or a local supplier, and prices vary.

How to fund this

These are common places to ask about paying for equipment like this. Each one decides its own eligibility and what it covers, so start by asking them.

All funding programs, state by state →

Details

Quick Facts Catalog facts · auto-generated
Type
Addresses
Platform
Age range
Complexity
Ready to use
Price
$609.00
Funding
  • AT Act lending
  • Out of pocket
  • Vocational rehab

What setup looks like

  • Out of the box
    1. Set the weighted base on a stable desk or table and plug in the lamp.
    2. Pull the lamp head into position. The spring arm holds it in place with no knobs to adjust.
    3. Turn the light on and dim it to a comfortable level, then place your reading or work material under the lens.

Sources & fine print

Vendor facts (name, price, platforms, vendor link) sourced from MaxiAids — view on vendor site (opens in a new tab); last checked November 2, 2026.

Classification & description AI-generated from vendor-published content on October 1, 2026 · confidence: high. Vendor specs may lag; verify before relying on details in a clinical or funding artifact.

How listings stay current