Bellman Visit 433-Alarm Clock Receiver

Summary

AI-generated from vendor-published content · April 26, 2026

This is a receiver unit for the Bellman Visit home alerting system that converts incoming wireless signals — from doorbells, smoke detectors, phones, and other transmitters — into flashing LED lights with distinct color codes for each alert type, plus audible tones. It's designed for people who are deaf or hard of hearing and need to know what's happening in their home without relying on sound alone. This is not a standalone product: it requires at least one Bellman Visit transmitter (sold separately) to function, and an optional bed shaker accessory adds vibration alerts for nighttime use. The receiver plugs into AC power with a NiMH battery backup, but keep in mind you're building a system here — the total cost grows as you add transmitters for each area of the home you want covered.

What Setup Looks Like

• Out of the box
  Plug the receiver into a wall outlet and, if desired, a phone jack for telephone ring alerts.
• With a guide
  
  1. Pair each Bellman Visit transmitter (doorbell, smoke alarm, etc.) to the receiver following the pairing instructions in the manual.
  2. Verify each alert type shows the correct color LED indicator for its signal source.
  3. Install optional bed shaker into receiver's accessory port if nighttime vibration alerts are needed — allow 30–45 minutes total for a basic setup. See manufacturer support resources for detailed instructions.

Where to Get It

Some links may be affiliate links — WhatCanHelp may earn a small commission from purchases at no extra cost to you. More on affiliates →