Browse Assistive Technology
Products
-
REHAdapt Floor Stand FS EcoLock
Est. $200–$450
The FS EcoLock is a floor stand that holds a lightweight device, like a communication aid or an iPad running eye-gaze software, at a position you choose. Its free-floating arm moves smoothly and stays where you put it, with no knobs or locks to tighten each time. The column is a fixed height, and the small base fits beside a bed, a wheelchair, or a sofa. It holds up to 10 kg and attaches with a quick release system, so the device can be put on and taken off fast. You also need the REHAdapt Mounting Plate, which is sold separately, to connect your device.
Verified 4 days agoSetup with instructions -
REHAdapt Floor Stand FS VarioFloat Light QP
Est. $600–$1,200
This floor stand holds a lightweight device, such as a communication aid or an iPad running eyetuitive, on a free-floating arm you can move by hand without locking and unlocking joints. The column stays at a fixed height, and a quick-release system lets you attach or remove the device fast. Its small footprint suits tight spots like beside a bed, next to a wheelchair, or by a sofa. It carries 0.7 to 3.0 kg, so heavier tablets or devices with big add-ons won't fit. A mounting plate is sold separately and is needed to attach your device.
Verified 1 week agoSetup with instructions -
REHAdapt TableClamp OneHand Light
Est. $120–$280
The TableClamp OneHand Light clamps to the edge of a table and holds a tablet or other device at a position you can adjust. It tilts up to 90° vertically and turns a full 360° horizontally, and it holds devices from 0.7 to 3 kg (1.5 to 7 lbs). A two-lever quick release lets you attach or remove the device fast, and the small footprint keeps ports and screens clear. It fits REHAdapt's UDS mounting system, and VESA-mounted devices can use it too with a separately sold REHAdapt Mounting Plate.
Verified 1 week agoSetup with instructions -
REHAdapt Floor Stand FS TeleFloat Light
Est. $250–$550
This floor stand holds a lightweight device, such as a tablet or communication aid, at a position you can set by hand. The articulated arm floats freely, so you move it where you want without locking and unlocking joints. The column stays at one fixed height, which keeps support steady, and the small footprint lets it fit beside a bed, wheelchair, or sofa. A UDS Quick Release system lets you attach and remove the device quickly. It holds between 0.7 and 3.0 kg, so heavier devices are not a fit. It also needs a REHAdapt Mounting Plate, sold separately, to connect your device.
Verified 1 week agoSetup with instructions -
Universal Switch Mounting - Variable Friction Arm
Est. $60–$130
This adjustable arm holds a switch in the exact spot where someone can reach and press it reliably. A large knob loosens the arm so you can move it smoothly, then locks it in place; the arm reaches out to about 20 inches (51 cm) and holds up to 2 kg. It comes with a Super Clamp for attaching to a wheelchair or a table edge. The arm fits devices with a standard 3/8" or 1/4" camera thread, but you'll need to buy a separate mounting plate (such as a Manfrotto triangular plate) and your own switch, since neither is included.
Verified 4 days agoProfessional guidance helps -
REHAdapt Floor Stand
Est. $600–$1,200
The REHAdapt Floor Stand holds a heavier device, such as a touch monitor or an AAC device, on a stable floor base, with a built-in shelf for a connected laptop. Its OneHand arm moves into position with no bolts to adjust, so you can reposition it quickly. The stand has a 78cm-wide base, reaches up to 120cm tall, and carries 6 to 13kg. It can be taken apart for storage and moved between home, clinic, and school. You'll need to buy the REHAdapt Mounting Plate separately, and if you need more than 120cm of height, the maker offers a quote for a taller version.
Verified 4 days agoSetup with instructions -
REHAdapt Mounting Arms
Est. $150–$600
REHAdapt Mounting Arms are adjustable arms that hold a device, switch, or similar item in a chosen position. They come in single, double, or triple versions, so the number of joints you can bend and set depends on the model you pick. QuickShift levers let you reposition the arm without starting over, which helps when the setup has to change between sitting, lying down, or different tasks. This is a mounting piece, not a complete solution. You'll need the device you want to hold, plus a compatible clamp or base to attach the arm to a wheelchair, bed, or table.
Verified 4 days agoProfessional guidance helps -
REHAdapt Floor Stand VarioFloat QP
Est. $400–$900
The VarioFloat QP is a portable floor stand that holds a lightweight device, such as a communication aid, on an articulated arm. The arm floats freely, so you can move the device where you want it without stopping to lock and unlock joints. Its small footprint lets it sit beside a bed, wheelchair, or sofa. Height and width are adjustable, and a quick release system lets you attach and remove the device fast. It holds between 2 and 6 kg, so it suits lighter devices only. The mounting plate is not included, so you'll need to add the right one before you can use it.
Verified 4 days agoSetup with instructions -
Pillow Switch on Easy Flex Mount
$125.95
This is a pillow switch attached to a flexible, clamp-on mount, so someone can activate a switch-controlled device by pressing a soft pillow. The mount clamps to a surface, and you bend the arm to put the pillow where the user can reach it most comfortably. It takes a light touch, around 35 to 40 grams of force, which suits someone who can't press a hard button. The arm is about 20 inches long and the whole set weighs about a pound. It's only the input piece. You'll need a switch-adaptable toy, communicator, or other device to plug it into.
Not recently verifiedProfessional guidance helps -
REHAdapt Floor Stand FS Mini
Est. $200–$450
The FS Mini is a small floor stand that holds a lightweight device, such as a communication aid or an eye gaze system like eyetuitive for iPadOS, in reach of someone at a bedside, a sofa, or a wheelchair. It has a flat base, lightweight tubes with QuickShift handles for repositioning, and a quick release system that lets you attach and remove the device fast. It can roll when tilted, so moving it around a room is manageable. It holds up to 2 kg, so heavier tablets and devices won't be safe on it. The mounting plate is sold separately, and you'll need it before anything can be attached.
Verified 4 days agoSetup with instructions -
REHAdapt Table Stand
Est. $150–$400
The REHAdapt Table Stand is a large tabletop stand that holds an assistive device steady at a spot you choose. It has an anti-tip feature and feet that line up on their own, so it stays stable even on a desk or table that isn't perfectly flat. It is designed with eye trackers in mind, including the eyetuitive for Windows. You can use it in a clinic, a classroom, or at home. The stand does not hold a device by itself. You also need the REHAdapt Mounting Plate, which is sold separately.
Verified 4 days agoSetup with instructions -
REHAdapt PentaFloat Tele Floor Stand
Est. $400–$900
The PentaFloat Tele Floor Stand holds a lightweight device, like a communication aid or an iPad running eye-tracking software, on a rolling floor base. A free-floating articulated arm lets you move the device into position easily, and a gas spring column raises and lowers it smoothly. The five-star base has casters and a small footprint, so it fits beside a bed, chair, or wheelchair and can be wheeled from room to room. Devices attach and release quickly with the UDS Quick Release system, but they must stay within 0.7 to 3.0 kg. The REHAdapt Mounting Plate is sold separately and is needed to attach your device.
Verified 4 days agoSetup with instructions -
Grip Switch Mount
Est. $30–$90
The Grip Switch Mount straps a switch to the arm so it sits right by the hand or fingers. That keeps the switch in one steady spot, which helps someone with limited hand or finger movement reach it the same way every time. It has an adjustable arm brace for comfort and support, and the fit can be tuned to the person. It works with the small it-Switch, the small Smoothie Switch, and the iSwitch, and it can be ordered for the left arm. The switch itself is not included, and neither is the device the switch will control.
Verified 4 days agoProfessional guidance helps -
Universal Switch Mounting
Est. $80–$150
The Magic Arm holds a switch or other lightweight device in just the right spot, then locks every joint at once with a single lever. It comes with a Super Clamp that grips a wheelchair, a table edge, or a similar surface. The arm reaches out to 51 cm (20 inches) and carries up to 2 kg. It fits switches and accessories with a standard 3/8" or 1/4" camera mount thread. This is only the mount: the switch and the mounting plate are not included, so you'll need to add a separate plate, such as a Manfrotto triangular plate, before it can hold anything.
Verified 4 days agoProfessional guidance helps -
Easy Flex Dual Ultimate Switch
$349.95
The Easy Flex Dual Ultimate Switch puts two Ultimate switches on one mount, so a person can activate two different devices from a single spot. Each switch sits at the end of a long flexible arm, about 25 inches, that you bend into position. A Super Clamp holds the whole unit to a wheelchair, table, or bedrail. This is a good fit for someone who needs two separate switch inputs, such as one for each of two devices, without setting up two mounts. It is only the switches and mount, so you'll need devices to plug them into.
Not recently verifiedProfessional guidance helps -
Gumball or Head Switch on Easy Flex Mount
$115.95
This is a button switch that sits on a bendable arm, so you can bend the arm and put the switch right where someone can reach it. You choose the Gumball style or the Head style when you order. The arm clamps to a wheelchair, tray, tabletop, highchair, or stroller. It's about 20 inches long and weighs around a pound. A switch does nothing by itself: it has to plug into a switch-accessible device, toy, or communicator, and picking the best spot and style usually goes better with a therapist's input.
Not recently verifiedProfessional guidance helps -
Inclusive Mounting for Universal Tablet Holder
Est. $120–$350
This mounting kit holds a tablet at a spot you choose, so the screen stays in easy reach on a table, desk, or wheelchair. The holder fits most tablets from 7 to 13 inches, with or without a case, and it leaves the ports and screen uncovered. A Super Clamp attaches it to the surface, and Quick Release joints let you reposition the arm. It comes in single, double, and triple tube versions, with more tubes giving more reach and ways to adjust. Pick the version based on how far the tablet needs to move from where it's clamped.
Verified 4 days agoSetup with instructions -
REHAdapt Floor Stand FS EcoFloat Light
Est. $200–$450
This floor stand holds a lightweight tablet or communication device on an articulated arm that floats into position without any knobs to lock. The column stays at one fixed height, and a quick-release system lets you attach or remove the device fast. Its small footprint means it can sit beside a bed, a wheelchair, or a sofa. It carries 0.7 to 3.0 kg, so it suits light devices like an iPad or a communication aid but not heavy ones. The REHAdapt Mounting Plate is sold separately, and you need it to attach a device.
Verified 1 week agoSetup with instructions -
REHAdapt Floor Stand FS TeleFloat
Est. $600–$1,500
The TeleFloat is a floor stand that holds a tablet or communication aid on a free-floating arm, so you can move the device where you need it without tightening any locks. The arm has gas spring height adjustment, and its small footprint lets it fit beside a bed, a wheelchair, or a sofa. It's built for lightweight devices (2.0 to 6.0 kg), including communication aids and eye-tracking setups like eyetuitive for iPadOS. The device attaches with a quick release system, but the REHAdapt Mounting Plate is sold separately, so you'll need to add it before the stand is usable.
Verified 4 days agoSetup with instructions -
REHAdapt Floor Stand FS Mini HD
Est. $200–$450
The FS Mini HD is a floor stand that holds a lightweight device, such as a communication aid or an iPad with eye-tracking, at a position that works for the user. It has a flat base with a small footprint, so it fits beside a bed, a wheelchair, or a sofa. The tubes are light, and the stand can be rolled when tilted, so it's easy to move from room to room. A quick release system lets you attach and remove the device fast. The stand holds up to 2.0 kg, so it's not meant for heavy tablets or larger setups. It also needs the REHAdapt Mounting Plate, which is sold separately.
Verified 4 days agoSetup with instructions -
REHAdapt Floor Stand FS VarioLock QP
Est. $600–$1,500
This floor stand holds a lightweight device, such as a communication aid or an eye-tracking unit for iPadOS, on an arm that reaches out over the user. Its small footprint lets it sit beside a bed, wheelchair, or sofa, and you can move the arm into place smoothly without working a manual lock. The device clicks on and off through a quick-release system, and both height and reach can be adjusted. It carries up to 7.5 kg. The mounting plate that connects your device to the quick release is sold separately, so you'll need to add it before you can use the stand.
Verified 4 days agoSetup with instructions -
One
$490.00
The One is a mounting arm that holds a switch, a speech device, or a tablet in a spot where the user can reach it comfortably. A single adjustment point moves three joints at once, so you can fine-tune the position without loosening several knobs. Its clamp grips most flat table edges and round or square tubes, like a wheelchair or bed frame. Mounting plates are sold separately, so you'll need one that matches your device. The arm works with AbleNet Quick Ready plates, plates that attach with a 1/4"-20 threaded rod, and RehAdapt plates that use the Spigot Link System.
Verified 4 days agoSetup with instructions -
REHAdapt Transportable Table Stand
Est. $150–$400
This foldable table stand holds an assistive device, such as a communication device or tablet, at a steady position on a tabletop. It comes with a custom bag, so it travels easily between home, school, and other places. Rubber feet resist slipping and vibration, and the UDS Quick Release lets you attach and remove the device quickly. It holds up to 7.5 kg and measures 49 x 54 x 54 cm. You'll need the REHAdapt Mounting Plate, sold separately, to connect your device.
Verified 4 days agoSetup with instructions -
REHAdapt OneHand HD Floor Stand
Est. $600–$1,200
This floor stand holds heavier assistive devices, such as all-in-one touch PCs, at a height and angle that works for the person using them. Its OneHand HD arm moves and locks without bolts or tools, so you can reposition it with one hand as needs change through the day. It supports 6-11 kg, has a base 110 cm wide, and reaches up to 120 cm. It's also portable enough to move between rooms. The stand is only the support: it needs the REHAdapt Mounting Plate, sold separately, to attach your device. If you need to hold a device higher than 120 cm, the vendor offers taller options by quote.
Verified 4 days agoSetup with instructions