Browse Assistive Technology

REHAdapt Floor Stand FS EcoLock

Est. $200–$450

The FS EcoLock is a floor stand that holds a lightweight device, like a communication aid or an iPad running eye-gaze software, at a position you choose. Its free-floating arm moves smoothly and stays where you put it, with no knobs or locks to tighten each time. The column is a fixed height, and the small base fits beside a bed, a wheelchair, or a sofa. It holds up to 10 kg and attaches with a quick release system, so the device can be put on and taken off fast. You also need the REHAdapt Mounting Plate, which is sold separately, to connect your device.

REHAdapt Floor Stand FS VarioFloat Light QP

Est. $600–$1,200

This floor stand holds a lightweight device, such as a communication aid or an iPad running eyetuitive, on a free-floating arm you can move by hand without locking and unlocking joints. The column stays at a fixed height, and a quick-release system lets you attach or remove the device fast. Its small footprint suits tight spots like beside a bed, next to a wheelchair, or by a sofa. It carries 0.7 to 3.0 kg, so heavier tablets or devices with big add-ons won't fit. A mounting plate is sold separately and is needed to attach your device.

REHAdapt Floor Stand FS TeleFloat Light

Est. $250–$550

This floor stand holds a lightweight device, such as a tablet or communication aid, at a position you can set by hand. The articulated arm floats freely, so you move it where you want without locking and unlocking joints. The column stays at one fixed height, which keeps support steady, and the small footprint lets it fit beside a bed, wheelchair, or sofa. A UDS Quick Release system lets you attach and remove the device quickly. It holds between 0.7 and 3.0 kg, so heavier devices are not a fit. It also needs a REHAdapt Mounting Plate, sold separately, to connect your device.

REHAdapt Floor Stand

Est. $600–$1,200

The REHAdapt Floor Stand holds a heavier device, such as a touch monitor or an AAC device, on a stable floor base, with a built-in shelf for a connected laptop. Its OneHand arm moves into position with no bolts to adjust, so you can reposition it quickly. The stand has a 78cm-wide base, reaches up to 120cm tall, and carries 6 to 13kg. It can be taken apart for storage and moved between home, clinic, and school. You'll need to buy the REHAdapt Mounting Plate separately, and if you need more than 120cm of height, the maker offers a quote for a taller version.

REHAdapt Mounting Arms

Est. $150–$600

REHAdapt Mounting Arms are adjustable arms that hold a device, switch, or similar item in a chosen position. They come in single, double, or triple versions, so the number of joints you can bend and set depends on the model you pick. QuickShift levers let you reposition the arm without starting over, which helps when the setup has to change between sitting, lying down, or different tasks. This is a mounting piece, not a complete solution. You'll need the device you want to hold, plus a compatible clamp or base to attach the arm to a wheelchair, bed, or table.

REHAdapt Floor Stand VarioFloat QP

Est. $400–$900

The VarioFloat QP is a portable floor stand that holds a lightweight device, such as a communication aid, on an articulated arm. The arm floats freely, so you can move the device where you want it without stopping to lock and unlock joints. Its small footprint lets it sit beside a bed, wheelchair, or sofa. Height and width are adjustable, and a quick release system lets you attach and remove the device fast. It holds between 2 and 6 kg, so it suits lighter devices only. The mounting plate is not included, so you'll need to add the right one before you can use it.

REHAdapt PentaFloat Tele Floor Stand

Est. $400–$900

The PentaFloat Tele Floor Stand holds a lightweight device, like a communication aid or an iPad running eye-tracking software, on a rolling floor base. A free-floating articulated arm lets you move the device into position easily, and a gas spring column raises and lowers it smoothly. The five-star base has casters and a small footprint, so it fits beside a bed, chair, or wheelchair and can be wheeled from room to room. Devices attach and release quickly with the UDS Quick Release system, but they must stay within 0.7 to 3.0 kg. The REHAdapt Mounting Plate is sold separately and is needed to attach your device.

Universal Switch Mounting

Est. $80–$150

The Magic Arm holds a switch or other lightweight device in just the right spot, then locks every joint at once with a single lever. It comes with a Super Clamp that grips a wheelchair, a table edge, or a similar surface. The arm reaches out to 51 cm (20 inches) and carries up to 2 kg. It fits switches and accessories with a standard 3/8" or 1/4" camera mount thread. This is only the mount: the switch and the mounting plate are not included, so you'll need to add a separate plate, such as a Manfrotto triangular plate, before it can hold anything.

Inclusive Mounting for Universal Tablet Holder

Est. $120–$350

This mounting kit holds a tablet at a spot you choose, so the screen stays in easy reach on a table, desk, or wheelchair. The holder fits most tablets from 7 to 13 inches, with or without a case, and it leaves the ports and screen uncovered. A Super Clamp attaches it to the surface, and Quick Release joints let you reposition the arm. It comes in single, double, and triple tube versions, with more tubes giving more reach and ways to adjust. Pick the version based on how far the tablet needs to move from where it's clamped.

REHAdapt Floor Stand FS EcoFloat Light

Est. $200–$450

This floor stand holds a lightweight tablet or communication device on an articulated arm that floats into position without any knobs to lock. The column stays at one fixed height, and a quick-release system lets you attach or remove the device fast. Its small footprint means it can sit beside a bed, a wheelchair, or a sofa. It carries 0.7 to 3.0 kg, so it suits light devices like an iPad or a communication aid but not heavy ones. The REHAdapt Mounting Plate is sold separately, and you need it to attach a device.

REHAdapt Floor Stand FS TeleFloat

Est. $600–$1,500

The TeleFloat is a floor stand that holds a tablet or communication aid on a free-floating arm, so you can move the device where you need it without tightening any locks. The arm has gas spring height adjustment, and its small footprint lets it fit beside a bed, a wheelchair, or a sofa. It's built for lightweight devices (2.0 to 6.0 kg), including communication aids and eye-tracking setups like eyetuitive for iPadOS. The device attaches with a quick release system, but the REHAdapt Mounting Plate is sold separately, so you'll need to add it before the stand is usable.

REHAdapt Floor Stand FS Mini HD

Est. $200–$450

The FS Mini HD is a floor stand that holds a lightweight device, such as a communication aid or an iPad with eye-tracking, at a position that works for the user. It has a flat base with a small footprint, so it fits beside a bed, a wheelchair, or a sofa. The tubes are light, and the stand can be rolled when tilted, so it's easy to move from room to room. A quick release system lets you attach and remove the device fast. The stand holds up to 2.0 kg, so it's not meant for heavy tablets or larger setups. It also needs the REHAdapt Mounting Plate, which is sold separately.

One

$490.00

The One is a mounting arm that holds a switch, a speech device, or a tablet in a spot where the user can reach it comfortably. A single adjustment point moves three joints at once, so you can fine-tune the position without loosening several knobs. Its clamp grips most flat table edges and round or square tubes, like a wheelchair or bed frame. Mounting plates are sold separately, so you'll need one that matches your device. The arm works with AbleNet Quick Ready plates, plates that attach with a 1/4"-20 threaded rod, and RehAdapt plates that use the Spigot Link System.

REHAdapt OneHand HD Floor Stand

Est. $600–$1,200

This floor stand holds heavier assistive devices, such as all-in-one touch PCs, at a height and angle that works for the person using them. Its OneHand HD arm moves and locks without bolts or tools, so you can reposition it with one hand as needs change through the day. It supports 6-11 kg, has a base 110 cm wide, and reaches up to 120 cm. It's also portable enough to move between rooms. The stand is only the support: it needs the REHAdapt Mounting Plate, sold separately, to attach your device. If you need to hold a device higher than 120 cm, the vendor offers taller options by quote.

REHAdapt OneHand Floor Stand

Est. $600–$1,400

This is a floor-standing mount that holds a heavier device, like a touch monitor, at a usable height and angle, with a built-in shelf for a laptop. Its OneHand arm moves into position without any bolts to loosen or tighten, so repositioning is quick. The base is 78 cm wide, the stand reaches up to 120 cm, and it holds 6-13 kg. It's portable and stable enough for clinic, classroom, or home use. You'll need to buy the REHAdapt Mounting Plate separately to attach your device. The 120 cm maximum height may be too low for some setups.

REHAdapt Floor Stand FS EcoFloat

Est. $200–$400

The EcoFloat is a floor stand that holds a lightweight device, like a communication aid or an iPad running eye-tracking software, where the user can see and reach it. Its arm floats freely, so you move the device into place by hand and it stays there without locking knobs to loosen and tighten. The column is a fixed height, and the small footprint lets the stand sit beside a bed, a wheelchair, or a sofa. A quick-release system lets the device be attached or removed fast. It supports 2.0 to 6.0 kg, so heavier equipment needs a different stand, and you must buy the REHAdapt mounting plate separately for your device to attach.

REHAdapt Mounting Bundles

Est. $150–$600

These REHAdapt bundles pair a Light 3D arm and a mounting plate with QuickShift Levers, so you get a complete adjustable way to hold a device in place. The levers let you reposition the arm, which helps when the device needs to sit in a different spot for different people or tasks. It's a positioning system, not a device on its own, so you'll need something to mount, such as a communication device or tablet, and a surface or frame to attach it to. Getting the right height, angle, and reach for a person's body and movement is the hard part, and it's where a therapist's input pays off.

REHAdapt Floor Stand VarioLock QP Plus

Est. $400–$900

This floor stand holds a lightweight tablet or communication device on a free-floating articulated arm, so you can move the device where you need it without stopping to tighten any locks. The column stays at one fixed height, and the small base fits beside a bed, wheelchair, or sofa. A quick release system lets you attach and remove the device fast, and the arm includes an L-tube for extra positioning options. It supports up to 7.5 kg (about 16.5 lb), so it suits lighter devices like eyetuitive for iPadOS or communication aids rather than heavy equipment. A carry bag and an extra 300 mm tube come in the box. You'll need to buy the REHAdapt Mounting Plate separately.

REHAdapt PentaFloat Eco Rolling Floor Stand

Est. $200–$450

The PentaFloat Eco is a small rolling floor stand that holds a lightweight device, such as a communication aid or a tablet running eye-gaze software, in a position you can adjust. Its free-floating arm moves smoothly and stays where you put it, with no knobs to lock. A five-star base keeps it stable, and the compact footprint lets it sit beside a bed, wheelchair, or sofa. The column height is fixed, and it only carries devices between 0.7 and 3.0 kg. It also needs a separate REHAdapt Mounting Plate to attach your device.

REHAdapt Pentalock Tele Floor Stand (with counter weight)

Est. $600–$1,200

This rolling floor stand holds a tablet, communication device, or computer on a locking, adjustable arm. A gas spring raises and lowers it from 105 to 175 cm. A built-in counter weight and a five-star base with casters keep it steady, and the compact footprint fits beside a bed, recliner, or wheelchair. It holds up to 5 kg, so it suits mid-weight devices rather than heavy ones. The device attaches through a quick release system, but you'll need to buy REHAdapt's mounting plate separately to use it.

VFA with Universal Tablet Holder

This mounting system holds a tablet at the angle you need, whether it is clamped to a table edge, a tray, or a wheelchair frame. The Variable Friction Arm moves smoothly and stays where you put it, even when positioned upside down. The holder fits most tablets from 7 to 13 inches, with or without a case, including iPads and Samsung Galaxy tablets. It grips the tablet at minimal contact points, so ports and the screen stay clear. The tablet is not included, and the maker notes it cannot guarantee the safety of your tablet or case, so check the fit and tightness before relying on it.