Mounting & positioning
Mounting hardware and positioning solutions that secure communication devices, switches, tablets, and other AT to wheelchairs, beds, desks, and tables.
-
One
$490.00
The One is a mounting arm that holds a switch, a speech device, or a tablet in a spot where the user can reach it comfortably. A single adjustment point moves three joints at once, so you can fine-tune the position without loosening several knobs. Its clamp grips most flat table edges and round or square tubes, like a wheelchair or bed frame. Mounting plates are sold separately, so you'll need one that matches your device. The arm works with AbleNet Quick Ready plates, plates that attach with a 1/4"-20 threaded rod, and RehAdapt plates that use the Spigot Link System.
Verified 4 days agoSetup with instructions -
Easy Flex Dual Ultimate Switch
$349.95
The Easy Flex Dual Ultimate Switch puts two Ultimate switches on one mount, so a person can activate two different devices from a single spot. Each switch sits at the end of a long flexible arm, about 25 inches, that you bend into position. A Super Clamp holds the whole unit to a wheelchair, table, or bedrail. This is a good fit for someone who needs two separate switch inputs, such as one for each of two devices, without setting up two mounts. It is only the switches and mount, so you'll need devices to plug them into.
Not recently verifiedProfessional guidance helps -
Gumball or Head Switch on Easy Flex Mount
$115.95
This is a button switch that sits on a bendable arm, so you can bend the arm and put the switch right where someone can reach it. You choose the Gumball style or the Head style when you order. The arm clamps to a wheelchair, tray, tabletop, highchair, or stroller. It's about 20 inches long and weighs around a pound. A switch does nothing by itself: it has to plug into a switch-accessible device, toy, or communicator, and picking the best spot and style usually goes better with a therapist's input.
Not recently verifiedProfessional guidance helps -
Pillow Switch on Easy Flex Mount
$125.95
This is a pillow switch attached to a flexible, clamp-on mount, so someone can activate a switch-controlled device by pressing a soft pillow. The mount clamps to a surface, and you bend the arm to put the pillow where the user can reach it most comfortably. It takes a light touch, around 35 to 40 grams of force, which suits someone who can't press a hard button. The arm is about 20 inches long and the whole set weighs about a pound. It's only the input piece. You'll need a switch-adaptable toy, communicator, or other device to plug it into.
Not recently verifiedProfessional guidance helps -
REHAdapt Floor Stand
Est. $600–$1,200
The REHAdapt Floor Stand holds a heavier device, such as a touch monitor or an AAC device, on a stable floor base, with a built-in shelf for a connected laptop. Its OneHand arm moves into position with no bolts to adjust, so you can reposition it quickly. The stand has a 78cm-wide base, reaches up to 120cm tall, and carries 6 to 13kg. It can be taken apart for storage and moved between home, clinic, and school. You'll need to buy the REHAdapt Mounting Plate separately, and if you need more than 120cm of height, the maker offers a quote for a taller version.
Verified 4 days agoSetup with instructions -
REHAdapt Floor Stand FS EcoFloat
Est. $200–$400
The EcoFloat is a floor stand that holds a lightweight device, like a communication aid or an iPad running eye-tracking software, where the user can see and reach it. Its arm floats freely, so you move the device into place by hand and it stays there without locking knobs to loosen and tighten. The column is a fixed height, and the small footprint lets the stand sit beside a bed, a wheelchair, or a sofa. A quick-release system lets the device be attached or removed fast. It supports 2.0 to 6.0 kg, so heavier equipment needs a different stand, and you must buy the REHAdapt mounting plate separately for your device to attach.
Verified 4 days agoSetup with instructions -
REHAdapt Floor Stand FS Mini
Est. $200–$450
The FS Mini is a small floor stand that holds a lightweight device, such as a communication aid or an eye gaze system like eyetuitive for iPadOS, in reach of someone at a bedside, a sofa, or a wheelchair. It has a flat base, lightweight tubes with QuickShift handles for repositioning, and a quick release system that lets you attach and remove the device fast. It can roll when tilted, so moving it around a room is manageable. It holds up to 2 kg, so heavier tablets and devices won't be safe on it. The mounting plate is sold separately, and you'll need it before anything can be attached.
Verified 4 days agoSetup with instructions -
REHAdapt Floor Stand FS Pentalock Eco
Est. $250–$600
This rolling floor stand holds a lightweight device, like a communication aid or an eye-gaze system for iPadOS, on an arm you can move freely without locking and unlocking it. The five-star base keeps it steady while the footprint stays small, so it fits beside a bed, a wheelchair, or a sofa. The column height is fixed, and it supports up to 5 kg. A quick-release system lets you attach and remove the device fast. The REHAdapt Mounting Plate is sold separately, and you need it to attach your device.
Verified 4 days agoSetup with instructions -
REHAdapt Floor Stand FS TeleFloat
Est. $600–$1,500
The TeleFloat is a floor stand that holds a tablet or communication aid on a free-floating arm, so you can move the device where you need it without tightening any locks. The arm has gas spring height adjustment, and its small footprint lets it fit beside a bed, a wheelchair, or a sofa. It's built for lightweight devices (2.0 to 6.0 kg), including communication aids and eye-tracking setups like eyetuitive for iPadOS. The device attaches with a quick release system, but the REHAdapt Mounting Plate is sold separately, so you'll need to add it before the stand is usable.
Verified 4 days agoSetup with instructions -
REHAdapt Floor Stand FS VarioFloat Light QP
Est. $600–$1,200
This floor stand holds a lightweight device, such as a communication aid or an iPad running eyetuitive, on a free-floating arm you can move by hand without locking and unlocking joints. The column stays at a fixed height, and a quick-release system lets you attach or remove the device fast. Its small footprint suits tight spots like beside a bed, next to a wheelchair, or by a sofa. It carries 0.7 to 3.0 kg, so heavier tablets or devices with big add-ons won't fit. A mounting plate is sold separately and is needed to attach your device.
Verified 1 week agoSetup with instructions -
REHAdapt Floor Stand FS VarioLock QP
Est. $600–$1,500
This floor stand holds a lightweight device, such as a communication aid or an eye-tracking unit for iPadOS, on an arm that reaches out over the user. Its small footprint lets it sit beside a bed, wheelchair, or sofa, and you can move the arm into place smoothly without working a manual lock. The device clicks on and off through a quick-release system, and both height and reach can be adjusted. It carries up to 7.5 kg. The mounting plate that connects your device to the quick release is sold separately, so you'll need to add it before you can use the stand.
Verified 4 days agoSetup with instructions -
REHAdapt PentaFloat Eco Rolling Floor Stand
Est. $200–$450
The PentaFloat Eco is a small rolling floor stand that holds a lightweight device, such as a communication aid or a tablet running eye-gaze software, in a position you can adjust. Its free-floating arm moves smoothly and stays where you put it, with no knobs to lock. A five-star base keeps it stable, and the compact footprint lets it sit beside a bed, wheelchair, or sofa. The column height is fixed, and it only carries devices between 0.7 and 3.0 kg. It also needs a separate REHAdapt Mounting Plate to attach your device.
Verified 4 days agoSetup with instructions -
REHAdapt PentaFloat Tele Floor Stand
Est. $400–$900
The PentaFloat Tele Floor Stand holds a lightweight device, like a communication aid or an iPad running eye-tracking software, on a rolling floor base. A free-floating articulated arm lets you move the device into position easily, and a gas spring column raises and lowers it smoothly. The five-star base has casters and a small footprint, so it fits beside a bed, chair, or wheelchair and can be wheeled from room to room. Devices attach and release quickly with the UDS Quick Release system, but they must stay within 0.7 to 3.0 kg. The REHAdapt Mounting Plate is sold separately and is needed to attach your device.
Verified 4 days agoSetup with instructions -
REHAdapt Pentalock Tele Floor Stand (with counter weight)
Est. $600–$1,200
This rolling floor stand holds a tablet, communication device, or computer on a locking, adjustable arm. A gas spring raises and lowers it from 105 to 175 cm. A built-in counter weight and a five-star base with casters keep it steady, and the compact footprint fits beside a bed, recliner, or wheelchair. It holds up to 5 kg, so it suits mid-weight devices rather than heavy ones. The device attaches through a quick release system, but you'll need to buy REHAdapt's mounting plate separately to use it.
Verified 4 days agoSetup with instructions -
REHAdapt TableClamp OneHand Light
Est. $120–$280
The TableClamp OneHand Light clamps to the edge of a table and holds a tablet or other device at a position you can adjust. It tilts up to 90° vertically and turns a full 360° horizontally, and it holds devices from 0.7 to 3 kg (1.5 to 7 lbs). A two-lever quick release lets you attach or remove the device fast, and the small footprint keeps ports and screens clear. It fits REHAdapt's UDS mounting system, and VESA-mounted devices can use it too with a separately sold REHAdapt Mounting Plate.
Verified 1 week agoSetup with instructions -
REHAdapt Transportable Table Stand
Est. $150–$400
This foldable table stand holds an assistive device, such as a communication device or tablet, at a steady position on a tabletop. It comes with a custom bag, so it travels easily between home, school, and other places. Rubber feet resist slipping and vibration, and the UDS Quick Release lets you attach and remove the device quickly. It holds up to 7.5 kg and measures 49 x 54 x 54 cm. You'll need the REHAdapt Mounting Plate, sold separately, to connect your device.
Verified 4 days agoSetup with instructions -
Inclusive Mounting for Universal Tablet Holder
Est. $120–$350
This mounting kit holds a tablet at a spot you choose, so the screen stays in easy reach on a table, desk, or wheelchair. The holder fits most tablets from 7 to 13 inches, with or without a case, and it leaves the ports and screen uncovered. A Super Clamp attaches it to the surface, and Quick Release joints let you reposition the arm. It comes in single, double, and triple tube versions, with more tubes giving more reach and ways to adjust. Pick the version based on how far the tablet needs to move from where it's clamped.
Verified 4 days agoSetup with instructions -
Inclusive Table Top Suction Mount
Est. $40–$120
This mount holds a switch, tablet, or communication device in a chosen spot on a table or desk. Two lock-and-release suction cups grip smooth, non-porous surfaces, and a pivoting arm lets you angle the device where the user can reach it best. It suits temporary or portable setups, such as moving a device between a desk and a classroom table. You'll need a mounting plate to attach your device (the Manfrotto Triangular Mounting Plate is the compatible one), so plan to order it with the mount. It won't hold on rough or porous surfaces.
Verified 4 days agoSetup with instructions -
Maxess Mounting System
Est. $40–$120
The Maxess Mounting System gives switches and communication devices a cushioned, stable place to sit so they stay put while someone uses them. It starts with a switch tray in three sizes (small, medium, large). Optional double-sided angled mounts, at 55° and 85°, tilt a switch toward the user, and each mount comes with hook and loop fasteners for one switch so you can move it around easily. It works well in classrooms, therapy sessions, and at home, and the ability to try different switch positions makes it handy during assessments. No switches or communicators are included, so you'll need to bring your own.
Verified 4 days agoProfessional guidance helps -
REHAdapt Mounting Arms
Est. $150–$600
REHAdapt Mounting Arms are adjustable arms that hold a device, switch, or similar item in a chosen position. They come in single, double, or triple versions, so the number of joints you can bend and set depends on the model you pick. QuickShift levers let you reposition the arm without starting over, which helps when the setup has to change between sitting, lying down, or different tasks. This is a mounting piece, not a complete solution. You'll need the device you want to hold, plus a compatible clamp or base to attach the arm to a wheelchair, bed, or table.
Verified 4 days agoProfessional guidance helps -
REHAdapt Mounting Bundles
Est. $150–$600
These REHAdapt bundles pair a Light 3D arm and a mounting plate with QuickShift Levers, so you get a complete adjustable way to hold a device in place. The levers let you reposition the arm, which helps when the device needs to sit in a different spot for different people or tasks. It's a positioning system, not a device on its own, so you'll need something to mount, such as a communication device or tablet, and a surface or frame to attach it to. Getting the right height, angle, and reach for a person's body and movement is the hard part, and it's where a therapist's input pays off.
Verified 4 days agoProfessional guidance helps -
Universal Switch Mounting
Est. $80–$150
The Magic Arm holds a switch or other lightweight device in just the right spot, then locks every joint at once with a single lever. It comes with a Super Clamp that grips a wheelchair, a table edge, or a similar surface. The arm reaches out to 51 cm (20 inches) and carries up to 2 kg. It fits switches and accessories with a standard 3/8" or 1/4" camera mount thread. This is only the mount: the switch and the mounting plate are not included, so you'll need to add a separate plate, such as a Manfrotto triangular plate, before it can hold anything.
Verified 4 days agoProfessional guidance helps -
VFA with Universal Tablet Holder
This mounting system holds a tablet at the angle you need, whether it is clamped to a table edge, a tray, or a wheelchair frame. The Variable Friction Arm moves smoothly and stays where you put it, even when positioned upside down. The holder fits most tablets from 7 to 13 inches, with or without a case, including iPads and Samsung Galaxy tablets. It grips the tablet at minimal contact points, so ports and the screen stay clear. The tablet is not included, and the maker notes it cannot guarantee the safety of your tablet or case, so check the fit and tightness before relying on it.
Verified 4 days agoSetup with instructions -
Grip Switch Mount
Est. $30–$90
The Grip Switch Mount straps a switch to the arm so it sits right by the hand or fingers. That keeps the switch in one steady spot, which helps someone with limited hand or finger movement reach it the same way every time. It has an adjustable arm brace for comfort and support, and the fit can be tuned to the person. It works with the small it-Switch, the small Smoothie Switch, and the iSwitch, and it can be ordered for the left arm. The switch itself is not included, and neither is the device the switch will control.
Verified 4 days agoProfessional guidance helps